PREREQUISITES

• Video projectors (three Panasonic RZ670 are used in this example).
• Make sure the video projectors feature continuous IP addresses (such as 192.168.1.101, 192.168.1.102, etc.
• Note down the network port used to control the projectors (defined by the manufacturer).



ACTIONS

OPEN THE  I/O MANAGER MODULE

Select {System > I/O Manager} or press [Alt+I].

  1. Select the Projector Devices tab.
  2. Open the Cue Editor module. Select {Show > Cue Editor} or press [Alt+Q].
  3. Create a new Cue. Click on the [+] button.
  4. Activate the [Record] toggle.
  5. Navigate back to the I/O Manager module.
  6. Select a projector from the list.
  7. Click on the Shutter [Open] button.
  8. Navigate back to the Cue Editor module.
  9. Deactivate the [Record] toggle to stop recording actions.
  10. Repeat these steps for the Shutter [Closed] button.
  11. Click on the [Go] button next to the Cue’s name to execute it.